Mora's new super-sized
Pathfinder Knife has probably generated more excitement than any Mora in recent history.
Ever since RMB
first mentioned
it last year, forums and blogs have been buzzing about the Pathfinder,
and for good reason. At a whopping 6.75" long and an 1/8" thick, it is
the biggest and baddest Mora knife ever produced.
It
is readily apparent from the Pathfinder's size and wallet-numbing
$129.99 MSRP (yes folks, a $100 Mora, that is not a typo) that Mora is
taking square aim at the US consumer survival knife market, which tends
to favor large blades. This is definitely a risky move on their part,
since they will be competing with well established, reputable US
survival knife makers such as Ontario, Gerber, ESEE, KaBar, Cold
Steel, Buck, SOG and many others.
As many longtime readers know, I'm a huge Mora fan, so I've been excited
about the release of this knife. Will the Pathfinder live up to its
hyped-up expectations? Find out as I take the Pathfinder into the Colorado backcountry to see if it actually measures up to
the standards of a true survival blade.
The SPECS:
Overall length: 11.75"
Blade Length: 6.75"
Weight with sheath (as measured on a digital US Postal Scale): 8.1oz
Weight without sheath (as measured on a digital US Postal Scale): 6.0oz
Steel type: Swedish High Carbon Steel
Sheath type: Nylon Webbing
Country of Manufacture: Made in Sweden
Street price: $97.95
FEATURES
Based on Mora's popular
Black Carbon Bushcraft Knife,
the Pathfinder is simply a longer version of the Black Carbon with a
wider blade towards the tip. Since they are essentially the same knife, I
won't rehash all the details and instead, encourage you to check out
our
full review of the Black Carbon posted back in November of 2012.
Size Comparison
The Pathfinder practically dwarfs the smaller Black Carbon Bushcraft Knife:
(click to enlarge)
The Pathfinder shown over top of SOG's popular
Force 6" Survival Knife (middle) and Mora's
Black Carbon Bushcraft Knife (bottom):
At 6.75" long, the Pathfinder's blade is nearly as long as a
KaBar Knife:
The blade thickness on the Pathfinder is the same as on the Black Carbon:
SHEATH
A longer, wider blade is not the only change for the Pathfinder. It also has a new nylon webbing
MOLLE compatible sheath with additional eyelets for tying the sheath to a pack or using it with a leg lanyard:
The belt loop is a bit thin for my taste, but it did hold the sheath
securely to my belt on a couple of day hikes. Due to the strap's
thinness, the sheath will hang loosely on your belt, similar to a
dangler sheath.
Since I like danglers, this was not an issue for me, but some might
find it annoying if they're used to a stiffer belt loop on their
sheaths.
The sheath has a plastic liner to protect it from the edge of the blade:
One issue that arose was the retention strap getting cut by the blade
when removing the knife from the sheath. This happened even when I was
being extra careful and trying to hold the strap away from the blade:
(click to enlarge)
FIELD TESTING
To field test the Pathfinder, I wanted to concentrate mainly on how its
larger blade would perform in comparison to the shorter-bladed Black
Carbon. This included making feathersticks, chopping and batoning.
Featherstick Test
I knew the Pathfinder would be better at batoning and chopping than the
Black Carbon, but I was pretty certain that it would lose some of the
Black Carbon's fine carving ability, which is typical of longer blades.
After making several feather sticks from dry Lodgepole Pine and Douglas
Fir, my first impression proved incorrect. The Pathfinder, in fact,
turned out to be as good if not better than the Black Carbon with its 6
3/4" blade:
Chopping
The Pathfinder proved to be a fairly capable chopper due to the forward
weighted blade and sharp edge. Unfortunately, this is where the trouble
began......
While chopping through a small dead pine branch, I stopped and inspected the edge on the Pathfinder:
I was quite surprised to see a chip in it. Here is a closeup of the edge:
(click to enlarge)
When I informed Mora of this issue, they were very concerned, and
quickly sent us a newer production sample of the Pathfinder to test.
This was in case the original test sample had a heat treatment issue or
some other manufacturing defect. Here the newer blade is on top, with
the original, darker test unit on the bottom. I could see no difference
in the two aside from a slight variation in shading on the
DLC coating:
I took the new test sample back out into the field and chopped some dead
pine branches with it. On the 3rd test branch, the same issue appeared,
except that instead of a chip, the edge rolled on the lower section of
the blade:
Due to the Pathfinder's edge failing during the chopping test, I decided to discontinue any further field testing.
Conclusion
What does the Pathfinder's failure during the chopping test mean
for its future as a survival knife in the US market? I think it's a
major growing pain for Mora as they enter this very competitive market.
Knowing
what I know about Mora and the overall quality of their knives, it is
quite obvious to me that Mora's fantastic Scandinavian edge grind, which
makes their knives such a dream to carve with, has met its match when
dealing with the physics of chopping.
As I've illustrated in
previous write-ups, Moras of different shapes and sizes have handled
batoning of exceptionally tough pieces of wood without failure. So I
doubt the Pathfinder's problem is an issue with steel quality or heat
treat methods. If the Pathfinder had a slightly thicker edge, I'm fairly
certain it could handle chopping with no issues.
With
this in mind, I think the Pathfinder is better suited for use as a
large bushcraft blade, as opposed to a survival knife, where edge
strength trumps fine carving ability. As a bushcraft blade,
the Pathfinder shines, because not only does it carve exceptionally
well, it also can baton larger pieces of wood than the Black Carbon
knife. Plus it's a better blade for tactical purposes if you're looking
for this quality in a bushcraft knife.
Other issues: Although it seems well constructed, the sheath
leaves a bit to be desired. The biggest problem is the retention strap,
which is going to wear with hard use, due to it getting cut when the
knife is pulled out of the sheath. The thin belt loop strap might also
bother some users. In my opinion, it
would be a good idea if Mora were to offer the Pathfinder with the same
plastic survival sheath that is currently offered with the
Mora Black Carbon Bushcraft Survival Knife. The Black Carbon's sheath is
lightweight, functional and a proven performer in the field.
I
would be remiss if I didn't mention the five ton elephant standing in
the corner of the room-- the Pathfinder's price. With an MSRP of
$129.99, it's a "what were they thinking?" type of moment. The consumer
culture that Mora created for its knives over the last several decades
is one of frugality, high value, and economy with quality. What does
this mean in street terms??? People just ain't gonna pay a whole lotta
"bank" for a Mora knife. At least not at this stage of the game. Mora
would be smart to lower the Pathfinder's impact on the wallet.
As it stands, I don't think the Pathfinder is ready for prime-time as a survival knife, due to its inability to handle chopping even small dead branches. Nothing short of a change in the edge thickness/geometry will be able to fix this problem. As a bushcraft blade, the Pathfinder falls only slightly short because of the retention strap issue on the sheath. Mora did inform us that they are looking into the issues with the edge as well as the sheath. My guess is that you'll see some type of revision to the Pathfinder soon.
Final Thoughts
If Mora offered the Pathfinder with a Black Carbon style plastic survival sheath, I think it would be a great choice for people looking for a bushcraft blade that can baton larger pieces of wood. You wouldn't want to chop with it, but you could use it just as you would any other Mora bushcraft blade. I'm going to give the Pathfinder a split review rating and recommendation, the first time I've done so at RMB.........
Survival Knife- 2 out of 5 Stars (Not recommended)
Large Bushcraft Knife- 3.75 out of 5 Stars (With a Mora Black Carbon style survival sheath, 4.5 out of 5 Stars)
For more information visit: www.industrialrev.com/bushcraft-pathfinder.html
Mora Pathfinder Knife UPDATE- Does the new revised Pathfinder stand up to the test?
About the author
Jason Schwartz is the founder and senior editor of Rocky Mountain Bushcraft. He is a former Red Cross certified Wilderness & Remote First Aid Instructor, and has taught bushcraft and wilderness survival techniques to the Boy Scouts of America, interned with the US Forest Service, and studied wilderness survival, forestry and wildland firefighting at Colorado Mountain College in Leadville, Colorado. Jason has also written for magazines such as The New Pioneer and Backpacker, including writing the "Tinder Finder" portion of Backpacker's "Complete Guide to Fire," which won a 2015 National Magazine Award (NMA). Email him at rockymountainbushcraft @ hotmail.com (without spaces)